Mesh experiment - Small beetle
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.35 – €0.42 net (excluding VAT)
For file: beetle_6cm_for meshprintitng_2colors__0.4n_0.2mm_PLA_MK4_28m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.38 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 28.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This time the beetle is only 6 cm, but it is thicker and cyrcle around is segmented for flexibility.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 25
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I sliced this model for 2 colors of PLA. You do not need MMU for this, just change the spool.
After few layers stop printing and put there material of your choice. Adjust it with strong magnets far away printed motive because of printing head. Than continue with printing. Be careful when removing magnets from print sheet! Magnets can be quite hot! You can remove it even when you are still printing when few more layers were put on print. Be careful after end of printing when removing it from print plate. Do not do that quckly, with force, or without patience. Use final product as you wish. Enjoy.