Cybertruck Mirror Delete Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To cover the hole vacated by removal of the compliance side mirrors.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 145
- Makes
- 1
- Views
- 1,410
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
The trim pieces work well in PETG thanks to it's toughness (ASA is a little too brittle and can break during install). The covers can be printed in either PETG or ASA (or metal using the vSS variant).
The files ending with the _DS suffix are for Drivers Side and those ending with _PS are for Passenger Side.
Update: I have added a _v2 version. To make it work, you will have to cut the rubber door gasket just below the opening. If you don't want to do this, stick with the original.
Update2: I added a “vSS” version for SLS printing in metal through a service such as in3dtec. Costs about $16 each to print in 316 stainless and as much again to ship to the US. Use the _v3 or _v4 trim pieces for this.
Update3: I added a _v4 version of the trim to use with the vSS metal cover which I think looks better (taper continues to edge of the door instead of stopping at the edge of the cover).
During prototyping I managed to drop two covers into the door and have not been able to extract them so I do recommend using the provided loop with a zip tie or string to avoid such things.
Note: I have also provided a cover for the now-exposed pins on the mirror connector. That model can be found here: https://www.printables.com/model/943201-cybertruck-mirror-connector-cover
CAUTION: Edges around opening are very sharp!
Place cover down over hole paying attention to the notch for the window trim.
Push the trim piece on at the thick end first and rotate into place to lock the cover.
Reattach the rubber door gasket.
Installation of the metal cover is different. It slides in from the side. Tip on how to match the truck finish are documented here:
https://www.cybertruckownersclub.com/forum/threads/matching-the-stainless-steel-finish-door-hole-mirror-delete-covers.24009/