1 / 3
[Fully Printed!] Mini Candy Dispenser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mini candy dispenser for Tic Tacs, Skittles, or M&Ms (or other small candies).
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 225
- Makes
- 1
- Views
- 1,474
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — NoDerivatives
Print guide:
The upper and lower body pieces require minor support.
Print 4 of the washers
Make sure to correctly orient the parts
Steps to assemble:
- After putting glue into the screw hole in the wheel, screw on the front plate with the crank and two washers. See image below and exploded view for more info
- Hold in place the back piece with the back screw and washers in place
- While still holding the back in place screw it on, again with glue in the other screw hole of the wheel
- Using glue, snap the top and bottom pieces into place and fill with candy
- Put on the top cover (do not glue!)
