Snowflake Star Spinning Decoration Remix Cgo
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.77 – €0.94 net (excluding VAT)
For file: Dec8_900_StarSnowflakeOrnament ~8cm v8 PROJECT_0.2mm_PLA_MK3S_59m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.85 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 58.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
"Tony Goes Riding" posted a great snowflake-star spinning decoration design, but I wanted it at approximately 50% scale.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 285
- Makes
- 6
- Views
- 910
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution
"Tony Goes Riding" posted a great snowflake-star spinning decoration design, but I wanted it at approximately 50% scale. When I tried to down-scale the original, I had problems with printing results.
I used the original as a template to re-make it in Fusion 360 with the target of bigger clearances and an approximate width of 8cm. This star is ~8cm wide, 8.5 cm tall, and 4mm thick. I re-worked a couple of elements (spacers removed between starts on main axis, cylindrical adornments changed to hexagons or rectangles, cropped top star points, etc) to increase odds of spinning success when just removed from the print bed.
My experience with solid color PLA has been exceptional! Just remove the single layer support on the bottom section of the central axis, and it's done.
For transparent and glitter PLA, I've used a knife to remove the first bridge strand from the upper central axis to go from rough spinning to smooth spinning. Depending on the printer, a quick trim to the interior two star's upper point to get rid of any printer blob has made it perfect for me.
I've included the PrusaSlicer 2.3.3 project files for a Mk3S+ for single print and another that prints four stars sequentially.