Gutter Mount for FlightAware ADSB (1090Mhz) Antenna
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Design allows a FlightAware ADSB (1090Mhz) Antenna to be mounted on the roof gutter (Steel Quad 150 Profile).
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 54
- Makes
- 0
- Views
- 738
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Design allows a FlightAware ADSB (1090Mhz) Antenna to be fairly easily mounted on the roof gutter (Steel Quad 150 Profile). It is mounted by placing over the edge of the gutter lip and rotating it back to the fascia board which you put a screw into the board to lock it into position.
The antenna is mounted to the bracket with 30 x 6 mm hex stainless bolts. The nuts are first inserted from the side and then the bolts. (Holes for the bolts go right through the print to make it easy to run a clearance drill through to clean the print up.
Antenna product is https://flightaware.store/products/antenna-1090mhz
This gutter profile is somewhat common in Australia. I have attached a template stl so you can check if it will work for you without wasting too much plastic filament. Feel free to modify to suit your needs
I printed in PETG with 5 perimeter layers and a 0.6mm nozzle which took about 6hrs. I also painted the upper part to match the colour of the gutter.