Raspberry Pi 1/2/3/3b/4/4b/Zero/2/W Standoff for electronics placement
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.10 – €0.13 net (excluding VAT)
For file: standoff_0.2mm_PETG_MK3S_8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 8.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a small standoff to place the pi 3mm off of any surface.
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 311
- Makes
- 1
- Views
- 1,529
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A lot of the time, I find myself needing to place a raspberry pi on a surface, but still need easy access to remove often. I designed these standoffs to be superglued in the correct locations, and then you can keep placing and removing the pi however many times you want