Pin header snap fixture (parametric - OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fixture for snapping a 40-pin header into smaller pieces. Based on @arturo182's design, but this one is customizable.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 46
- Makes
- 0
- Views
- 561
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
This is a configurable openscad version of @arturo182's design (https://twitter.com/arturo182/status/1441494689652281344?s=20)
It allows you to break a 40-pin header into smaller pieces. The configuration allows you so select the size of the pieces you want to break off.
In the openscad file there is a variable called pieces to configure the length of the pieces you want to break off. The uploaded openscad file has [12,16,12]. This means that you will get 2 slots on either side to break of pieces of 12-pin headers.
The uploaded image allows me to break of pieces of 8 and 16. So the pieces variable is set to [8,16,16]. The sum of these pieces should always be equal to the variable called length. By default this on is set to 40 pins, which is the standard length of these pin-headers.