Spinning Snowflake Ornaments
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.91 – €1.11 net (excluding VAT)
For file: spinning snowflake inner star_0.2mm_PLA_MK3S_1h8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.01 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.13 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Three different snowflake designs that print-in-place and spin freely once finished.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 116
- Makes
- 1
- Views
- 618
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
This is a set of three snowflake ornaments. Each snowflake is different but all three are print-in-place. Once the print is done you can loosen the joints and the snowflake will spin freely in the hexagonal shell.
Snowflake printed with 100% infill for best results, hexagon shell printed with 10% infill.
Designs have been tested on an MK2.5S, MK3, and Mini with no issues. Printed at 0.2mm Quality with 0.4mm nozzle and no supports. Single prints take just over an hour. Can fit 4 to a bed on MK2.5S and MK3S and 2 on Mini.
Looks great with a color change just before the pins of the snowflakes start.
Text can be added to the hexagon for a personalized touch (as shown in photo). These were used as a school fundraiser.