1 / 3
belavi pathway lamp adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple adapter for a specific belavi lamp that allows to put the ground pins ca 8cm to the back
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is designed for the belavi solar pathway lamp sold by Aldi Süd (link). The usecase here is to pin the lamp into the ground while right at the lamps position sits an obstruction like a concrete foundation. It offsets the goundpins by 8 cm to the back. It takes two M6 nuts to the back for the pins and two M6 bolts to screw into the lamps base. Print with gyroid infill pattern, 15% infill, 5 top and bottom shells and 3-4 perimeters