1 / 2
karate kid hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x95.63mm in size You m
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 32
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x95.63mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Earth Brown
At layer #11 (0.96mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.