Dielectric Hose Coupler
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.89 – €1.09 net (excluding VAT)
For file: HoseJoiner-PartBody_0.4n_0.2mm_PETG_MK4IS_50m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.99 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 49.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
an insulating coupler to prevent corrosion of aluminum hose fittings
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Many hoses come with aluminum fittings. When attaching these to brass hose bids the dissimilar metals cause a cathodic reaction (the aluminum corrodes) that causes the fitting to seize and makes disconnecting the hose difficult.
This simple insulator prevents that reaction.
Print in PET-G for better sun / heat resistance with 4 perimeters (makes the threads cleaner) and 40% in-fill.
Make sure to use a hose washer on the female end.