1 / 7
Touchscreen for Prusa Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for Waveshare 5 inch touchscreen display and Raspi for attachment to the Prusa Enclosure (or anywhere else).
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 1
- Views
- 195
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I took the power supply directly from the Raspi board (not from the USB-C). For this you need an adapter (see picture). The case requires support when printing (see picture). Additional M3 screws and nuts are required for assembly.
I used this display:
Waveshare 5 Zoll Touchscreen Display
and this adapter: