1 / 3
D-tap connector ( Female )
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable D-tap connector.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 164
- Makes
- 0
- Views
- 659
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fully printable 90 degree D-tap connector.
Parts needed..
(1) 2mm by 10mm screw and nut.
(2) 3mm copper female pins. I attached the Fusion360 model for the pin insert because some pins may be slightly different sized (depending on where you buy them). For my model I used these bullet pins from amazon.
https://www.amazon.com/gp/product/B09MCKKBHJ/ref=sw_img_1?smid=A3M3XLEB8UBM5Y
Print Instructions..
I used PETG for the case.
4 walls. 100% infill.
.15 layer height.
TPU for strain relief for flex.
10 walls for strain relief.