1 / 2
Tank tread conversion for Biltema RC car
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Converts Biltema RC snurrbil (84-1103) into a tank
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
This is mostly for fun. I think the original wheels are better at almost everything except looking cool ;D
Printing:
The tread should be printed in TPU using 0.7 line width and ‘Classic’ wall generator (Set ALL line widths to 0.7mm, this works even with a 0.4 mm nozzle). Set infill to 0, wall count 1, brim to inside 2mm and brim gap 0. The brim can be left on the print.
The hub can probably be printed in whatever you want. I printed them in ABS (blue) and ASA (yellow). I used the ‘sacrificial layer’ feature for the screw hole to avoid having any supports.