1 / 3
Tormek Spacer WITH Threads
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spacer with threads instead of plastic pipe
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 61
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
If you remove grindstone during honing you need to put in a spacer.
This is the chosen one ;-) a spacer with included threads!
Print settings I used:
Filament: Prusament PETG
Layer Height: 0,15
Perimeters: 3
Infill: 25% Cubic
Top/Bottom Fill Pattern: Concentric
I also have a Height Modifier from 8mm to the top with layer height 0,25mm no need for 0,15 when there is only a “pipe”