Philips Hue Still ceiling lamp adapter to ceiling lamp socket housing
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.61 – €5.63 net (excluding VAT)
For file: Hue bracket indicative g-code.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.12 excluding VAT (range midpoint).
- Weight reported by the author
- 83 g
- Print time reported by the author
- 4.48 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter plate to install Philips Hue Still ceiling lamp to ceiling lamp socket without permanent modifications
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Pictures tell the story - use this mounting plate to install Philips Hue Still ceiling lamp on an existing ceiling light socket without drilling any holes or doing any permanent modifications. Has holes designed to fit the plate on the junction box, feed the wires through, and to install the Hue Still on it.
Installation
Prepare the adapter plate by installing 3xM4 (if I remember correctly) nuts on it.
Pictures give a rough guidance. Remove the original ceiliing light socket and its bracket. Feed the wires through the adapter plate and screw it on the connection box. Feed the wires through the Hue housing and screw the housing on the adapter plate.
Follow local rules with electrical connections.
Printing instructions
Orientation: Flat area facing the build plate
Supports: None
Layer height: 0,20mm
Material: PLA, PETG
Infill: 15%
Raft: Not needed