3D Printed DIY Spacemouse with detachable usb cable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of Teaching Tech's V2 spacemouse with detachable usb-c cable and m2 bolts to attach the ball joints.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 361
- Makes
- 1
- Views
- 2,262
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of Teaching Tech's V2 spacemouse with detachable usb-c cable. The arduino pro micro is attached so the usb port is accessable from the outside. I have also modified the position of the mounting points for adding weight to the base of the spacemouse as well as removed the old wire passthrough in the frame. The remix also includes ball joints that attach using m2 bolts instead of “4 gauge”.
Most of the parts are the exact same as the V2 design from Teaching Tech. Only the spacer, the base plate and frame have been modified. There is also the arduino mount that is a completely new part that is required for this version.
Watch my build video:
The wiring and software is the same as the V2 spacemouse by Teaching Tech.
Required hardware:
Fasteners
4x m2x6mm self tapping screws
8x m3x6mm self tapping screws
14x m3x10mm socket head cap screws
4x m3x20mm socket head cap screws
All hardware except the fasteners is the same as the V2 spacemouse by Teaching Tech:
https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix