AdBlue spanner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mercedes Vito AdBlue cap spanner
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 41
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a spanner for the Adblue cap on Mercedes Vito Euro6 models. May well fit other models too.
The cap has restricted access to grip it well, so I designed this spanner to keep in the door pocket ready for use.
The head has a 15 deg. offset so the spanner can be used either way up to best slip over the cap. DON'T OVER TIGHTEN THE CAP! You could damage the cap because the spanner gives lots of leverage. When Adblue leaks out under the cap it probably means the ‘O’ ring on the neck needs replacing.
Printing in PETG
Layer height: 0.2
Nozzle: 0.4
Top layers: 6
Bottom layers: 6
Wall loops: 6
Infill: 20%
No support.