Beer Holder - Holster for 330ml/500ml Can
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdy beer holder, specially printed in two parts to utilize the stability of the printed layers
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 149
- Makes
- 0
- Views
- 434
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this two-part beer holder especially for festivals and therefore it had to be very sturdy because it is not handled well there and has to last a few days.
Suitable for European cans with a size of 330 and 500 ml
For non-standard cans, testing would be required. I would be pleased to receive feedback if you have been successful.
The diameter of the upper part is 65 mm
Both parts only need to be put together after printing. If it should be a little loose, you can use a drop of glue before putting it together
tolerance 0,2 mm
Print: use tree support, infill 15%, walls 3 or more