1 / 5
TESLA 3 HIGHLAND turn signal lever — image 1
1 / 5

TESLA 3 HIGHLAND turn signal lever

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Add a turn signal switch to your Tesla Highland

Rating
5 / 5
Likes
18
Downloads
110
Makes
1
Views
2,675
Reviews
2

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Tesla 3 Highland turn signal lever design.

I recommend using PTG, ABS filament. Do not use PLA.
After printing, visible elements should be sanded and painted.

Use four small strips of foam (5mm x 5mm x 12mm) to help the lever return to the center position better. There is a place prepared for this in the housing.

You need two S3XY BUTTONS to operate:
https://enhouto.com/

You will also need double-sided tape to stick the lever in the car. Use good quality so that it does not peel off.

Short movie:
https://youtu.be/GzSh3E6bUF0?si=OJGYysF7ZqmCKR1v

Tags