1 / 5
jewelry and earrings carousel - manège à bijoux — image 1
1 / 5

jewelry and earrings carousel - manège à bijoux

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

jewelry and earrings merry-go-round fully printable on mini prusa !!

Rating
4.5 / 5
Likes
68
Downloads
99
Makes
2
Views
983
Reviews
2

Updated at source:

Model information

Category
Women
License
Creative Commons — Attribution — Noncommercial

rotating jewelry and earring merry-go-round mounted on a lazy susan glass bead axial bearing

I've added a cavity in the base to make the whole thing heavier by filling with sand, for example, I used a large stainless steel nut, the bottom cleats are used to create a stop to prevent the assembly from opening up

part 5 has a printing and mounting direction

When fitting, remember to align parts 1 and 2 correctly. Part 2, which is fitted at the very top of the assembly, is fitted with lugs for attaching collars that will hang down the inside of the mast through the aligned holes.

it is necessary to clean the print from its supports at the level of the ball bearing and apply a little grease when mounting.

Tags