Arylic Up2Stream Pro v3 Enclosure with Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an enclosure (box & lid) for the Arylic Up2Stream Pro V3 DIY board. The board is part of a house-wide WiFi syste
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 46
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
This is an enclosure (box & lid) for the Arylic Up2Stream Pro V3 DIY board. The board is part of a house-wide WiFi audio solution in a board that allows you to choose which devices / rooms you stream music to at any given point. Think of it as a low cost SONOS system for the DIYer. The box gives access to all the outward facing ports and indicators including:
- Ethernet
- Analog Line In
- Analog Line Out
- USB
- Micro-USB (power) / PC Audio DAC
- Power (2-wire)
- Power Button
- 4 LED Indicators
- IR Receiver
It also includes a slot to run the wireless antenna outside of the box while the lid is on (optional)
The board screws directly into the box using standoffs sized for screws laying around from PC builds.
The board has additional headers (digital audio, DIO, etc) and there is an additional hole on the front or through the LED display hole that they can be run.
I included IGES versions of each solid.
Print Settings
Printer Brand: Monoprice
Printer: Maker Ultimate
**Rafts:** No
Supports: No
**Resolution:** 0.2
Infill: 15%
**Filament:** Inland PLA+ Black
I recommend using a temperature tower to get the right temperature for bridging gaps like the LED indicator slot or the ethernet slot. I did not have any problems bridging those gaps with my printer. If your printer has difficulty, you can include supports.
I imagine this could look cool with a crystal material, but I went with black boxes go with my audio systems.
Category: Audio