1 / 3
M3 Screw Wishbone for the Cryptid Sledgefire Conversion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An alternate Wishbone part for the Cryptid that uses an M3 x 16mm socket head screw instead of an M6x 20mm grub screw.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 32
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
An alternate Wishbone part for the Cryptid that uses an M3 x 16mm socket head screw. If you have a set of M3 screws and don't want to buy a pack of M6 grub screws you only need one of.
Hardware: M3 x 16mm Socket head screw.
Just screw the M3 screw into the hinge pin all the way then screw it onto the wishbone with the sledgefire priming bar in it. It could benefit form a PLA safe thread lock or a dab of super glue to keep it in place.