Flash the Schnauzer (Filament Painting)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AI Generated Hueforge filament painting of Flash the white Schnauzer dog. Give a like if you love my content.
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 140
- Makes
- 0
- Views
- 1,722
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
AI generated hueforge filament painting of our beloved and cute Flash the white Schnauzer dog.
Print settings:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
I recommend using a brim if you're having adhesion issues
Filaments Used:
PLA PolyTerra Black Transmission Distance: 0.3
PLA Geeetech Matte Grey Transmission Distance: 3.5
PLA Geeetech Matte Stone Grey Transmission Distance: 8.8
PLA Geeetech Matte White Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Matte Grey
At layer #18 (1.52mm) swap to Matte Stone Grey
At layer #25 (2.08mm) swap to Matte White for the rest.
💖 If you liked the model show me some love. Would love to see your makes! 💖