Channel knob compatible with MOTOROLA DP4001EX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a repalcement knob compatible with MOTOROLA DP4001EX
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 171
- Makes
- 0
- Views
- 685
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This is a repalcement channel knob compatible with the MOTOROLA DP4001EX radio.
The knob is compsed of 3 pieces the exterior printed in PLA, and the interior printed in PETG.
I used the PETG for the interior because is stroger and less probable to deform with usage.
The interior was printed in white so the postion fin can make good contrast with the knob exterior black housing as the original one.
All the parts were prnted with 0,2mm layer and 15% infil, as well starndard settings for both filaments for Prusament . Brim was used on the PETG smal parts, but is optional.
The assembly requires abit of patience and the small piece with the indicator fin must be inserted first and the interior body after. Pay attention to the chanfer to align the parts and use moderate pressure to press the interior piece to final postion.
I did not used glue, as the toelerances of the prints ensure all parts stay in place.