1 / 3
Raspberry Pi 5 PoE Housing (Waveshare HAT F) + Prusa mount + CSR-hole
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This case is a fork of the case by Volker. Unfortunately it came without a camera cutout and Prusa mount.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 437
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Housing for the Raspberry 5 with the Waveshare PoE HAT (F).
- easy to print, no supports required
- needs 4 2.5mm screws to assemble, uses the bolts which come with the PoE HAT
- vents for good air flow
- access to Raspberry Pi GPIO header
(Text by: Volker)