1 / 3
Shooters Global SG Go Belt Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SG Go belt clip out there with proper retention
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 187
- Makes
- 1
- Views
- 657
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
I didn't see too many models of the SG Go belt clip out there with proper retention so I made my own model. There are two models one with an 8mm gap and another with a 16mm gap for thicker belts.
Printed Material: PLA/PLA +
Layer Height: .16mm
Walls: 4 Minimum (Alternate extra wall recommended)
Infill: 30%