1 / 9
Otto diy 1.69inch Lcd
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix di Ottodiy with Lcd 1,69 inch
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 75
- Makes
- 0
- Views
- 709
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
LCD Hardware Connection
| LCD | NANO |
| VCC | 5V |
| GND | GND |
| DIN | 11 |
| CLK | 13 |
| CS | 10 |
| DC | 7 |
| RST | 8 |
| BL | 9 |
Print instructions
Recommended to use a FDM 3D printer.
No need supports or rafts.
Resolution: 0.3mm or 0.2mm for better resolution
Fill density 15%
Features
- 💻 Simple Programming Arduino
- 👇 Reacts to touch
- 👀 LCD EYES AND MOUTH
- 👣 Walks & dances
- 🔊 Makes emotional sounds
List of Parts
- 🖥 Otto Nano Microcontroller I/O board
- 🔌 Micro USB cable
- 🔋 Rechargeable battery.
- ⚙ 4 x micro servo motors with set of screws.
- 👀 lCD 1.69inch (aliexpress)
- 👇 Touch sensor
- 🔊 Buzzer
- 🌈 10 x DuPont cables
- Phillips screwdriver
- 3D Printed head
- 3D print the biped body parts : Otto DIY biped| STL files |