Cybertruck Bed Divider Fix
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.45 – €0.55 net (excluding VAT)
For file: CTBDI_x4_PETG_MK3S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.50 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 34.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The bed divider for the Cybertruck is a tight fit. This part can be used to give a much needed extra 2mm of space.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 65
- Makes
- 0
- Views
- 1,055
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Working with the bed divider:
- Remove the 5/16 nut on each end and slide out the clamp feet. Be careful - there is a cylinder and spring inside that can drop out.
- Remove the two side plastic guides and replace with these prints.
- Reassemble.
You may also have to remove the rubber feet (drill out the two rivets on each).