1 / 4
Showerhead
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Showerhead with a spray angle of 22/20 degrees, 1/2'' thread.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 67
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Print it in upward position (thread side down, see last picture), no support, 0.2mm layer hight, PETG.
If you have adhesion problems, use a 3mm brim.
There are two model files, showerhead8 defaults to 1.0mm nozzles, the other has 1.2mm nozzles.