1 / 4
clock gear drive train - all the design criteria and calculations. — image 1
1 / 4

clock gear drive train - all the design criteria and calculations.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the second iteration of the drivetrain assembly with a functional working printable layout.

Rating
0 / 5
Likes
8
Downloads
195
Makes
0
Views
1,191
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

This is a work in progress and a module for the whole clock design project focusing on the gear train.

Clock gear train design

I wanted to design this from first principles to gain an understanding of how this all works and fits together. After lots of reading I decided to try and figure it out on a white board and a calculator and this is where it all ended with what I initially thought was a working solution. 

So the escapement with 30 teeth and a pendulum ticks at a two second cycle with 30 teeht, completing one rotation in 30 seconds, so seconds is sorted once you have a tuned pendulum and escapement. 

So this design aimed to have all pinion gears, i.e. the small ones with 8 teeth, so then the first pinion and gear with 60 teeth give you a ratio of 7.5, i.e. 60/8=7.5. The second set is 64/8=8, so the two ratios combined is 7.5*8=60 that gives you the minute wheel that then completes one rotation every 60 minutes, i.e. the third wheel. 

So from here on you aim to get the next wheel to complete one rotation in 43,200 second, i.e. 12 hour and that will be able to drive the hour hand. 

When I eventually figured this out I thought it was all done and just down to drawing this up. 

 The gear ratio works, but there is a failure to mount this design. Gear 3 pin position overlaps with a gear surface. The solution is clear, the pinion gears need to have more teeth to maintain the gear ratios, I will incorporate this into the next calculations and design. 

Second Iteration

The second iteration design with increased radius hour gears calculated is shown above.

The design drawing looks like this and the rendered models like this:

You can download the full Fusion 360 model from here: https://a360.co/3S6jP9S The stl files is available for print processing named: "drivetrain iteration 2 v2"

You need 4mm shafts to mount these gears. 

I plan to incorporate this geartrain into a clock project. 

I've also added a compact layout that I intend to work from to add the escapement and the drive components for the hour and minute hands.

This creates the timings I was looking for, but a lot of extra work and gearing the drive hands for hour and minutes. The ideal scenario would have the minute gear and the hour gear on the same shaft and gear ratios between the second intermediate gear and the hour gear that still achieves a reduction of 12 and creates a combined dimensional displacement to get the gear back aligned with the minute shaft. 

At this point it dawned on me the amazing achievements of inventors going back almost 400 years now inventing the mechanical timepieces without the cad and math tools we have at our disposal today. 

A layout plan with minutes and hours overlapping

I started with new gear ratios that gave me an equal displacement between the pinion gear and the drive gear while maintaining the 1:4 and a 1:3 ratio that combined steps down the final gear 1:12. 

Gear NameTeethPinionRatio
1. Esc328-
2. Int 16087.5
3. Minutes64208
4. Int 260163
5. Hours64-4

The ratio column holds the key. The ratio is calculated for the second gear “Int 1” by taking 60 teeth divided by pinion from gear 1, "Esc" with 8 teeth that yields 7.5 with 7.5x8 yielding 60 for the minute reduction gear and 3x4 yielding 12 for the hour hand reduction gear. 

So now we can tie the minute hand directly to the shaft of the minute gear and the hour hand directly to a hollow shaft holding the hour hand. 

All is now in hand to model up the drive train.