1 / 1
Heat-shrink tube cutter (multi material)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small heat shrink tube cutter. Remix based on a Design by LiS92 on Thingiverse
- Rating
- 4 / 5
- Likes
- 47
- Downloads
- 342
- Makes
- 1
- Views
- 2,712
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Just a small adaption of the original design by LiS92 (from https://www.thingiverse.com/thing:4437039) for lazy people like myself:
Dual material version so you don't need to colour the numbers by hand.
Additional hardware required:
1pc. cutter blade
2pcs. 12x30mm springs (any cheap ones from Amazon should be sufficient)
2pcs. M4x40mm screws
2pcs. M4 nuts
3pcs. M3x8 bolts (for the blade and stopper)
3pcs. M3 nuts
Print Settings:
| Material | PET-G |
| layer height | 0,2mm |
| infill | 20% |