Mega-sized Brick Magic Shop Building Set (5:1 scale)

This is a set of blocks that can be used to recreate the classic Castles themed Magic Shop Lego set from 1993 at 500% scale.

The stl files for the parts have all been organized into folders to make them easier to find. 

To aid with printing, there's a pdf file of the parts inventory in the “Other Files” folder to assist with colors and quantities for each part.  Once you have all the parts printed, there's a zip archive of the original instructions for building the set in this folder as well.

For those with Bambu printers, there are several Bambu project files located in the “Bambu 3mf Files” folder to simplify things even further.  Note that several of the parts in the set can be better printed by cutting them in the slicer first.  Those parts have been included with cuts and connectors in a file called “cut parts.3mf”.  This is a Bambu project file, so you will need BambuStudio to open it and view the contents.

The wizard minfig in this set was remixed from the Brick MegaFigure published by Julia Ebert.  The only changes made to the original design are:

• A modified torso which includes a cavity to hold the torso sticker part provided with this design (the sticker part will need to be glued in place at this location).
• All parts were scaled down 50% to work with the rest of the model published here at a 5:1 scale from original parts

The basic instructions for assembling the figure can be found in Julia's post.  This is a fantastic model that's easy to print and assemble.  Special thanks to Julia for sharing this work!

All the parts needed to build the Magic Shop (including those to customize the Wizard) were taken from thal72's Printables profile and scaled to 500%. He has a massive library of brick parts available at this location.  If you wish to do any additional customization to this set, this is a fantastic resource to find additional parts.  Special thanks to him as well for sharing this work!

One last thing to point out for those wishing to build this set:  The original design calls for a green 6x6 plate to serve as the starting piece on which to build things.  This piece was just a bit too big to print on a Bambu P1 series print bed.  So, this part has been substituted with two 3x6 green plates instead.  If you have a large enough print bed and would prefer to print the parts according to the original design, the 6x6 plate can be found on thal72's profile here.  Just be sure to scale the part to 500% before printing.

If you decide to print this, we'd love to see it.  Please post pics of your makes, and please consider liking this design by clicking the "like" link above.

Happy Building!!

Note: all our models are considered fan-made art and are intended for personal use only. We are not affiliated with any official brand and sales of digital files or physical copies (makes) is strictly prohibited.