HUSKE SeaSucker 15x150mm adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to mount a fatbike with a 15x150mm tru-axle mount onto a SeaSucker HUSKE car rack.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
This is an adapter to mount a fatbike with a 15x150mm tru-axle mount onto a SeaSucker HUSKE mount.
SeaSucker provide many adapters (see https://www.seasucker.com/en-ca/collections/rack-accessories ) but not this one.
Openscad source design is provided, so you can adjust the tolerance of the inside diameter (tolID, currently at 0.4mm) and the tollerance of the outside diameter (tolOD, set at 0.1mm) or get other adapters (9x100, 12x100, 15x100, 15x110, …) as well.
Make sure you print with high fill rate, and ideally PETG instead of PLA, since this has to be a strong part.
(The picture with the two fatbikes has an earlier slightly different version of the adapter)