1 / 8
GPU Kit Card
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini GPU Kit Card
- Rating
- 5 / 5
- Likes
- 194
- Downloads
- 588
- Makes
- 6
- Views
- 5,514
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
GPU Kit Card
Inland Filament Used:
Printer Settings:
- 1 Hr 11 Min
- 220°C Nozzle Temp
- 60°C Bed Temp
- No Supports
- Infill: 15% Gyroid
- Speed: 100mm/s wall, 180mm/s infill, 300mm/s travel
- Assembly Instructions:
- Using a flush cutter remove the GPU parts from the sprue
- Place the first fan with the chamfered part pointing out
- Insert the axle with moderate force (depending on your printer's tolerances/ material)
- Press fit the grated vent into its corresponding cavity (may need a drop of glue if too loose)
- On the back side place the second fan just as the first one was done
- For the bracket, inset the clip into it and then press both into the two holes on the flat square end of the model. This may take force for a solid fitment and depending on the flexibility of your printed material.
STL designed by _cosmic_forge