Cable chain mount for Orbiter v2.0 on SP-5

This is a remixed model based on two models:

1. Orbiter 2.0 mount, which is available on the Orbiter Project official website.(https://yahoo69400.autodesk360.com/g/shares/SH9285eQTcf875d3c539015654d850240f3d)
2. Cable chain mount for Orbiter 1.5 by Alex Vikingo.

Files :

1. Choose and print one version of the ‘A’ files for the toolhead : either the normal mount or the Turbiter version. Generally, you will need the ‘A_Orbiter 2.0 Mount’ if you don't use the Turbiter.
2. Print the ‘B’ part

     * For the back side, you can print or reuse the original part instead of the ‘B’ part.

Required :

  To mount on the block

  (!!! Place M3 nuts under the mount BEFORE fixing the mount on the carrier !!!)

    M3 Nuts x 2

    M3 Screws x 10 mm x 4

  To mount Orbiter 2.0

    M3 Button head screws x 10 mm  x 2

    * You can use socket head screws, but they will be disturbing when you open the shaft.

  (Option : For Turbiter)

    M3 Button head screws x 16 mm  x 2

    M3 Nuts x 2

  For cable chains

    M3 Screws x 12 mm (minimum) x 2

    M3 Nuts x 2

    M5 Screws