Activated carbon filter box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box to hold activated carbon for 3D printer exhaust filtration.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 108
- Makes
- 0
- Views
- 630
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Fill with activated carbon to filter VOCs and odors from 3D printer exhaust. I made this specifically for the Qidi Q1 Pro. It fits in the external holder you can find here. https://makerworld.com/en/models/411229?fbclid=IwZXh0bgNhZW0CMTEAAR3f0M9DgXlkferK0tAFzDghmkW5zvwlpZ_0zBMjcjAj5kIBMrbzlP3vYic_aem_Yo-cguwd-8sszccZO92pzQ#profileId-313181
I made the grid open for max airflow. Others I had seen were quite restricted. Openings are 2mm x 5mm. Overall size is 60mm x 60mm x 33.3mm
If you want to keep the heat in your printer you can print the close off part I made here. https://www.printables.com/model/943829-plug-to-close-off-exhaust-on-the-qidi-q1-pro