1 / 2
Vectrex Prototype PSU bracket replacacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prototype of a replacement PSU mounting bracket for the Vectrex system.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
V4 fixed mounting oversight and various reinforcements, printing now likely requires supports
V3 was adjusted for positioning and clearances
V2_3mmExtend is 1st adjustment after original prototype due to the hole alignment on the PSU board was off by roughly 3mm. Stl reduced to medium resolution to enable upload.