Unifi USW 16 Lite POE Switch - 1U Rack Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Unifi USW 16 Lite POE Switch - 1U Rack Mount
- Rating
- 4 / 5
- Likes
- 52
- Downloads
- 720
- Makes
- 0
- Views
- 4,686
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
From the original upload:
I designed this 1U rack mount for the Unifi USW 16 Lite POE switch which fits the standard 19" racks with a depth of under 8 inches. The screw holes on the back are for M4.5x.75 as those were the spare screws I had lying around. The two pieces for the rack mount are meant to be joined without any hardware, but if they are loose, you can use a dab of hot glue.
This is my first ever from scratch design.
Printed with my E3Pro and PLA silver filament. Should print in about a day for all parts combined depending on your printer.
Non-commercial use only please!
EDIT: added the .step file for ease of modifications
Notes:
Supports are only needed for the extension piece and only on build plate.
You can go with a lower infill extension and back plate. You can even try the main part with a lower infill if this rests on another item below it.