1 / 2
IKEA LACK Enclosure Filament Feedtrough
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This models helps to feed filament through the upper table of LACK enclosure
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 41
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My LACK enclosures filament rack is on top of the tables. To feed the filament to my printer I drilled a hole through the tabletop.
Because the tabletop is hollow inside a little pipe was neccessary to lead the filament through the tabletop. I came up with this model consisting of the pipe part named feedthrough. It is inserted into a drilling of at least 6 mm diameter. To tighten the feedthrough the feedthrough_nut is required.
Print settings
No special settings required