1 / 8

Voron 2.4R2 modified for Linear Rods / Round Rods

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified XY lower joints and YZ axis lower end mounts, 8mm rods instead of MNG rails.

Updated at source: Jul 31, 2024

Model information

These are for normal 6mm belt on XY, for 9mm belt see here.

For Z axis modifications and STL see here

Oriented as they should be printed.

Do clean the 8mm holes for the rods and carriages before pushing them in.

You can separate the models in slicer, so you can see what is modified and what is left original.

Printed with normal “Voron parts” print settings, use ABS or HIPS, although PLA and PETG should be fine for not enclosed printers.

For more see: