1 / 2
Needle threader
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needle threader with a place for embedded 0.25 mm wire
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 56
- Makes
- 1
- Views
- 598
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've used 0,25 mm Kynar electrical wire.
- Must be printed at 0,1 mm layer height to preserve wire channel size.
- Set a pause at 1,80 mm layer.
- Make a 0,8 mm loop at both ends of the wire. Wrapping once or twice around small tweezers should be enough.
- Put the wire during the pause with the ends inside the hole. Make sure it doesn't protrude the sides of the hole.
- Resume the print and the wire will be closed inside.