Brick Block Puzzle Box - no metal hardware

newest version! original size and no metal hardware. not even magnets! uses springs instead.
want it larger? all tools nedded for a biggie size is in project_files.zip on Thingiverse (includes python a script for bulk enlarging): https://www.thingiverse.com/thing:5140802/files

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

Yes

Supports:

Yes

Resolution:

0.2

Infill:

10%

Filament:
esun PLA+ Black and Red

Notes:

bricks in red, everything else in black. glue still needed.

bolts printed on a raft:
0.3 z gap
2 solid top layers

everything else except rough bricks if chosen:
no raft.

supports only on level 4:
everywhere
30 degrees (could be anything)
0.4 z gap
0.6 horizontal gap or bigger.

Parts in rough folder of project_files.zip (optional):
horizontal offset: -0.4
fuzzy skin on; 0.4 intensity.

supports:
everywhere
30 degrees
0.4 z gap
0.6 horizontal gap

raft:
0.3 z gap
2 solid top layers

note: may need to slightly drill the threaded holes to clean them up a bit.

Post-Printing

part counts:

assembles the same as 3d-printy's. except using 3d printed bolts and no magnets.

Core:

• bolts.stl x 1
• Slider_Left.stl x 1
• Slider_Right.stl x 1
• Level_1.stl x 1
• Level_2.stl x 1
• Level_3.stl x 1
• Level_4.stl x 1
• Level_3_Cover.stl x 1
• Gear.stl x 1

Latch.stl x2 Bricks:

Brick_Corner.stl x 8

• Brick_Side.stl x 4
• End_Brick_Corner_Left.stl x 3
• End_Brick_Corner_Right.stl x 3
• End_Brick_Side.stl x 4
• End_Brick_Center.stl x 2
• Brick_Right_Slider.stl x 1
• Brick_Left_Slider.stl x 1