1 / 1
Bialetti Venus Moka Pot Funnel - 4 Cup
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Funnel designed to make prepping a cofee using the 4 Cup Venus Moka.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 107
- Makes
- 0
- Views
- 467
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Print Settings:
Layer heights: 0.15mm
Wall Loops: 3
Infill: 15%
Attached photo of print was printed using a SV06 w/klipper, using SIDDAMENT PETG CF Green V2, which can be found here: https://siddament.com.au/products/petg-cf-green
Thanks Sid!
Steps on a sucessfull coffee prep!
Reliable Source -→ https://alternativebrewing.com.au/blogs/brew-tips/moka-pot-tips
- Fill the bottom water chamber up with hot water to, but not exceeding the pressure valve.
- Grind enough coffee to fill the filter basket evenly and DON'T pack the grounds down. Remember the grind required for a Moka Pot is coarser than espresso.
- Using your sweet newly printed funnel, load the basket with your fresh ground beans.
- Assemble the entire pot and make sure it is screwed together properly.
- Place on a heat source at medium heat (~204° F / ~95° C) and let sit. Leave the lid up so you can see what’s happening,
- Once you see the coffee initially make its way to the upper chamber, turn the heat down to about 50% of the original temperature.
- Remove the pot from your heat source when the coffee reaches the bottom of the spout or all the water is spent. This should take between 4 and 5 minutes.
- Pour, enjoy.
