1 / 10
Gutter for Bitumen Roofing Felt (Dachpappe Regenrinnen System)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple customizable gutter system to easily connect to a bitumen roofing
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 147
- Makes
- 2
- Views
- 684
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Customize a simple gutter for your shed with bitumen roofing.
- Choose from 10cm, 20cm and 25cm long gutter rails to fit your roof length.
- End-caps and drain-caps for both mounting orientations are provided
- The bitumen felt self-glues to the gutter rail when bend and pressed into the narrow slot.
This slot is designed to fit the double thickness of a regular bitumen felt in case you have them overlapped.
Assembly:
- The narrow slot of the rails is supposed to face towards the bitumen felt. Which is then bend and inserted into this slot. The bitumen felt will self glue to the wall of the rail.
- Stick rails together using the “connector” piece
- To support a rail at a point where no connector is present. i.e. near the drain-cap, use the “holder”.
- Glue the piece using gel glue or similar contact glue to make it water tight.
Print Advise:
Print in PETG or similar weathering resistant material