1 / 7
Honeycomb Alpha/Bravo Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mounts for the Honeycomb Flight Controls
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 212
- Makes
- 0
- Views
- 1,238
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here are some mounts that can be used to hang your Honeycomb Alpha Yoke and Bravo Throttle on a wall (or in my case the back of a door). I used two 4x35mm screws to fix each base. Print two plugs for each mount to fill the screw holes. The pillars are identical between each model and you should glue these in place in the bases with a good quality cyanoacrylate adhesive.
I used Bambu PLA Tough filament but any PLA should work fine. I used 25% infill for the bases and plugs and 60% infill for the pillars. No supports are necessary.