CR10 upgrades - All-in-1 Electronics bay - Braces - Stealthburner - CanBUS - BD sensor - Klipper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CR10 upgrades based on Voron 2.4
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 59
- Makes
- 0
- Views
- 551
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I decided to rebuild an original CR10 for a mate. Added the following
- CanBUS
- Braces
- Stealthburner on linear rails
- BD Sensor https://www.printables.com/model/831679-lazy-bd-sensor-adapter-for-stealthburner-voron/comments/1779948
- All in 1 Electronics bay in the base
- Dual z
- Y & Z cable chains
I don't have the printer anymore but all bolts were 3mm hex (can't remember lengths but have supplied STEP files)
For the cable chains I had to drill holes in the chassis (1,2 below) to attach them with bolts. 3 was attached using t-slot nuts. See attached image for connection locations.
TODO: Flesh out the instructions if there is enough interest
NOTE: all mods are at your own risk. Double check configs, wiring etc and if not sure get a professional to confirm
ADDITIONAL PARTS:
- Alum Rods
https://www.bunnings.com.au/metal-mate-10-x-1mm-3m-aluminium-round-tube_p1079412
- Rubber Feet
https://www.bunnings.com.au/surface-gard-22mm-black-round-rubber-bumper-6-pack_p0262227
- Polycarbonate sheet for roof & floor of electronics bay
https://www.bunnings.com.au/sunlite-8-1-2-x-0-61m-solar-grey-twinwall-polycarbonate-sheet-1200mm_p1010936
- BD sensor
https://www.aliexpress.com/item/1005006169022237.html?spm=a2g0o.order_list.order_list_main.87.6e1818029kTEgA
- Mainboard - SKRv1.3 & U2C v2.1
Had these lying around but many newer boards have canbus included in the mainbaord eg octopus etc