1 / 2
Collapsible Drink Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Summer is here, what better then enjoying a cold beer or any drink!
- Rating
- 5 / 5
- Likes
- 119
- Downloads
- 224
- Makes
- 1
- Views
- 1,923
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Hello and welcome!!
The collapsible drink holder is a perfect model to carry your drinks.
It Gets printed ALL IN ONE, without Support and is suitable with the most printers in the market, that have bed dimensions of 220*220*220 and bigger.
I printed it in Ender 3 and the slicing software used was cura!
It turned out very good so i will share the key features that was used,
- Speed 60 mm/s
- Retraction enabled
- Retraction Distance 5 mm
- Retraction speed that works for me is 45.0 mm/s
- Combing Mode - Not to Outer Surface
- Enabled avoid printed parts when travelling
- Enabled avoid support when traveling
- Avoidance distance 0.625 mm
- cooling ON
Hope you will enjoy this stl file,
It would be much appreciated a FOLLOW and LIKE !
Thank you !
