USB Flash Drive Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Certain slim/key sized USB flash drives are prone to the metal casing bending and "bowing" in. I created this end-cap…
- Rating
- 4.667 / 5
- Likes
- 19
- Downloads
- 131
- Makes
- 3
- Views
- 463
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Certain slim/key sized USB flash drives are prone to the metal casing bending and "bowing" in. I created this end-cap in an effort to reduce the chances of my Kingston DataTraveler SE9 Gen2 drive caving in.
There are two versions:
SHORT - outer wall is 7 mm tall, inner tongue is 10 mm
LONG - outer wall is 12 mm tall, inner tongue is still 10 mm
Print Settings
Printer Brand:
FlashForge
Printer:
FlashForge Creator Pro
No
Supports:
No
0.1
Infill:
75%
Notes:
Due to the tight tolerances and small gap between the outer walls and the inner "tongue", consider printing at 0.1 layer height.
Category: Computer