Dynacraft 6v Wheel Hubs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dynacraft 6v Wheel Hubs to add aftermarket gearbox and motor to Dynacraft 6v ride-on toys.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
My son is into speed and wanted his Spider-Man 6V Super Car upgraded. I have upgraded a few previous ride-on toys with variable speed controllers, and this one presented a challenge because it was only one-wheel drive. Dynacraft created a spot to mount another motor, but I did not have another wheel hub, nor did I know if the factory wheel hub would pair up nicely with the new gearbox. I decided to build a new wheel hub to attach to the new gearbox. The goal was to overengineer it because I run these cars at 20v, which puts much more stress on the parts.
I can not guarantee that these hubs will work perfectly with other gearboxes besides the one listed below. I built these to spec with little play. If others find other gearboxes that work, feel free to PM me, and I'll add them to the list below.
The wheel hubs pair perfectly with the wheels for this Spider-Man car from Dynacraft, but may work with others. The height of the wheel hub is 48.20 mm. https://dynacraftwheels.com/products/087876806585
For those interested in replicating this process, I printed my hubs using ASA, with four wall loops, 40% infill with gyroid, and an outer brim. These settings ensured a sturdy and reliable end product.
Are you enjoying this design? Prototyping takes time and materials. Any support helps bring future ideas to life! Donate here.